Hints & Tips
Gallery
FrexGP is proud to introduce the FrexGP PRO Series as one of the most sophisticated Hi-Performance Racing Simulation Steering Controller Tuning Kits and Accessories available today. It is specially designed for Logitech GT Force PRO /Driving Force PRO*@Steering Wheels.(It can also be used for PC via USB connection)

FrexGP PRO Series products are developed for Racing Games in Microsoft Windows* Platforms & Playstation2*GT4 & More.

Logitech GT FORCE/Driving Force *Pro Steering Wheel Features Highlighted:
Optical Sensing System Encodes Digital Precision
* Steel Bearings Supports Steering Shaft
* Solid and Strong Force Feedback Thechnology
* Up To 900 Degrees Steering Wheel Rotation
You just have to switch by pressing
Select + R3 + Right Paddle.
* Pre-Calibrate To Any Rotation Degree (PC Only)
Command of Paddle shifter and Stick shifter make to common assign. Select + R3 + Stick Shifter Backward
Do it again if you need to assign them different for stick shifter use as handbrake for exhample.

Official PC driver download from WingMan Team
Logitech, the Logitech logo, and the Logitech products referred to herein are either the trademarks or the registered trademarks of Logitech.Logitech Inc. Corporate HeadquartersFremont, CA 94555 USA Microsoft, Playstation2, Gran Turismo is a trademark of Sony Computer Entertainment America Inc. Windows and Windows NT and/or other Microsoft products referenced on the Frex web site are either trademarks or registered trademarks of Microsoft. All other trademarks are property of their respective owners.
Brake Hardness adjustment movie
Additional instruction manual for MOMO Force Pedal assemble PDF file
JSJ*'s GPLshift+ Support FrexGP Hshift+. This software has a mode that clutch needs to press enough to change shift. It won't shift without enough clutch press and makes unconfortable gear noise!
Download profile for 6speed Hshifter, Shift error wav and readme for GPL

New Hshift+8speed set as Shifter_Mode = 2.USB (2 is # in Widows controller ID)
How to calibrale Clutch axis of Hshift+ in Widnows DirectX:
********************************************************
Control panel> game controller>specify the controller>
setup>adjustment> wizard for adjustment of gaming device

Center wheel and then push button
(Do not touch to anything and shift to any gear and then go to next)
Next screen: move left/right  up/down 2 toggle switch on the top cover.

Next adjust center:
IMPORTANT/ Press Clutch a little or half.
( This is about the point the clutch engages. Try various settings to find a stable setup)

OK, Next
Adjust axis: Fully press and release clutch.

Overwrite> OK

Please confirm the red calibration bar move whole bottom to top.
Few additional washers and two longer bolts make wider pedal position easily.
Put hook side of Velcro to the bottom. This is effective solution when play on office floor carpet.